MetShield Catalogue
27 page document which has detailed information on: The Product - MetShield
Industry Testing
The Application of MetShield
MetShield Calculator
A cost benefit analysis model for MetShield users
It can calculate direct net savings in dollars and in percentage to MetShield users and describes other benefits which are in-direct financial savings. It also mentions Occupational Health and Safety and Environmental benefits.
MetShield Demo CD
It is a demonstration of MetShield on a Break Machine designed by FALEX Corporation of USA. It demonstrates the comparison of a situation without MetShield and with MetShield.
ADVANTAGES
The greatest existing limitations to efficiency in manufacturing equipment, engines, transmissions, differentials, hydraulic systems, bearing etc. is the inertia caused by friction. Over the years, this problem has been addressed with a wide range of products, such as fats and tallow in ancient days, to today’s high tech coating and lubricant extenders serving as additives to oil and grease.
Despite all additives available today, only marginal improvements have been made in improving the performance of lubricants.
MetShield, a secret formula, is primarily a ferrous Metal Conditioner to be used with Lubricant such as oil and grease in a proportion of 1:16 to reduce the friction between two ferrous metal parts. It is suitable for standard and high performance engines, diesel transport, marine, manufacturing and especially for heavy industry applications.
MetShield has been invented by a scientist of NASA and it is an absolute technological breakthrough. MetShield is biodegradable, non-combustible, non-toxic, non-carcinogenic and non-corrosive. MetShield was tested by the research department of University of Melbourne (Australia) and proved to be an absolute technological breakthrough in the lubricant world to reduce friction in harsh environments. University of Melbourne’s research department is considered to be one of the best research departments in the world and their detailed research report can be available upon request.
Despite all additives available today, only marginal improvements have been made in improving the performance of lubricants.
MetShield, a secret formula, is primarily a ferrous Metal Conditioner to be used with Lubricant such as oil and grease in a proportion of 1:16 to reduce the friction between two ferrous metal parts. It is suitable for standard and high performance engines, diesel transport, marine, manufacturing and especially for heavy industry applications.
MetShield has been invented by a scientist of NASA and it is an absolute technological breakthrough. MetShield is biodegradable, non-combustible, non-toxic, non-carcinogenic and non-corrosive. MetShield was tested by the research department of University of Melbourne (Australia) and proved to be an absolute technological breakthrough in the lubricant world to reduce friction in harsh environments. University of Melbourne’s research department is considered to be one of the best research departments in the world and their detailed research report can be available upon request.
-
How it Works: -
- MetShield is carried by lubricants like motor oil, transmission oil, hydraulic fluid, air conditioning oils and greases to the friction points.
- MetShield works in conjunction with pressure and heat, usually requiring a minimum of 38°C to begin activation.
- MetShield is non-toxic and non-flammable.
- MetShield can be poured at temperatures as low as -20°C and withstands extreme operational temperatures.
- MetShield does not contain PTFE, moly, graphite or other fortifiers.
-
MetShield Advantages: -
- When you mix MetShield with the lubricant, it disperses well with the lubricant and changes the molecular structure of a ferrous based metal 5 microns deep and makes the metal surface smoother and denser and creates the frictionless environment. Due to the frictionless environment created, lubricant starts to perform extra ordinarily and MetShield users can enjoy the following benefits.
- Oil change intervals get extended and you get savings in Oil cost up to 40% based on the application.
- Cranking amperes of the machine goes down by around 4%. Cranking amperes is directly related to the power cost and running cost
- Fuel consumption goes down
- Friction is reduced drastically and Machinery maintenance goes down by 200% to 1000%
- Maintenance breakdown reduced drastically – Less down time
- Maintenance schedule get extended
- Labour cost goes down tremendously
- Machine can take more load and still a smoother surface
- Keeps the machine temperature cool
- Reduces the mechanical noise and machine operates smoothly – Good for Occupational Health and Safety
- Environment Friendly - Reduces the air pollution drastically
- Reduces the size of large destructive particles – Fewer broken particles
- Works better in Pressure and Hear – Harsher the environment, better it performs.
- Non Toxic and Non Flammable
- Better and more economical operational life